What is Porteqbot?

The Portable Equipment Smart System (Porteqbot) is an Artificially intelligent robot for portable equipment that automates existing portable equipment/machines, reduces cost of labor, and frees humans from repetitive labor by using our retrofit kit that includes autonomous software.

The artificial intelligence algorithms enable Porteqbot to perform human labor routines such as "turn on/off the generator", "mow the lawn", “remove the snow”, "power wash the floor", "blow the leaves" etc.

Our retrofit kit converts non-smart portable equipment to smart portable equipment and enables control via the user's device. It also supports devices such as the Lawn Mower, Snow Blower, Water Pump, Pressure Washer, Generator, Leaf Blower, Water Pump, Air Compressor machines with pull starter and combustion engine.

Our system comes with both electric and gasoline lawn mowing. That is, if you are replacing your gasoline equipment, Porteqbot gives you cost effective electric lawn mower and snow blower solutions with our top-tier functionality mentioned in this document.


The Porteqbot's Architecture

The porteqbot's adapter (smart coil starter) interfaces with porteqbot equipment. The control app and remote control communicates with the equipment to give instructions, owners can control designated equipment accordingly using control buttons, remote control or mobile app. The Porteqbot's power management is explained further below and here.


The Benefits and Importance of Porteqbot

Automation: Converts manual start systems to automatic starters using our smart coil starter, flow sensor accelerator (actuator) and choke system. The existing equipment’s pull coil starter has an interface that enables our smart coil adapter to be plugged into it and creates a rotation that cranks up the engine. The hardware interface exists across most portable equipment with combustion engines and as a result, Porteqbot uses it as our solution entry point to automate the equipment


Autonomous: Porteqbot carrier/robot can easily mount on existing equipment and can carry them around for autonomous tasks. It consists of two rear motor wheels and two free wheels with mounting brackets to hold it in place.


Power Management: The smart coil starter can give instructions to the Automatic Transfer Switch to change a power source line after or before turning the generator off and on. Porteqbot has been tested with our TS and PS Switch. The phase switch interfaces with electric meters and can only manually or automatically switch between poles (meaning it cannot switch from or to generator) while the TS can switch between two power sources. A scenario will be a PS output and generator. TS doesn’t rely on PS. The two are independent but the user can combine them for effectiveness.


Electric Equipment: The Porteqbot smart coil starter is interchangeable. It can power electric equipment which are but not limited to lawn mower and snow blower. We provide lawn mower and snow blower equipment as well. The smart coil starter can power the equipment giving the owner about 2 - 4 AH and 24/40V.


How to Use Porteqbot with Existing Gasoline/Diesel Equipment


How to use Porteqbot on a generator?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Turn off your gas tap, remove the gasoline pipe, connect to the Porteqbot flow sensor out-flow, connect the flow sensor in-flow to your gap tap.
  • Mount the choke handler to the bracket toward the choke, connect the finger to it, connect the cable to the Smart coil starter/replace choke with e-choke
  • Connect the smart coil starter to the phone APP and start powering on and off your generator

How to use the Porteqbot on Snow Removal?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Install the accelerator on the handle bracket.
  • Connect the smart coil starter to the phone APP and start powering on/off your snow removal device
  • For autonomous operations, mount the snow removal device onto our carrier/robot and activate autonomous tasks through our phone app

How to use Porteqbot on a Lawn Mower?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Connect the accelerator cable to the Porteqbot smart coil starter.
  • Connect the smart coil starter to the phone APP and start powering on/off your lawn mower
  • For autonomous operations, mount the lawn mower onto our carrier/robot and activate autonomous tasks through our phone app

How to use Porteqbot on Water Pressure Washer?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Mount the choke handler to the bracket toward the choke, connect the finger to it, connect the cable to Smart coil starter/replace choke with e-choke.
  • Connect the smart coil starter to the phone APP and start powering on/off your power washer
  • For autonomous operations, mount the Pressure washer onto our carrier/robot and activate autonomous tasks through our phone app

How to use Porteqbot on Leaf Blower?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Mount the choke handler to the bracket toward the choke, connect the finger to it, connect the cable to Smart coil starter/replace choke with e-choke.
  • Connect the smart coil starter to the phone APP and start powering on/off your leaf blower
  • For autonomous operations, mount the leaf blower onto our carrier/robot and activate autonomous tasks through our phone app

How to use the Porteqbot on Water Pump?

  • Ensure your coil starter seat is 200mm wide (most equipments are), replace pull coil starter with the Porteqbot smart coil starter
  • Mount the choke handler to the bracket toward the choke, connect the finger to it, connect the cable to Smart coil starter/replace choke with e-choke.
  • Connect the smart coil starter to the phone APP and start powering on/off your water pump
  • For autonomous operations, mount the Water Pump onto our carrier/robot and activate autonomous tasks through our phone app

How to use Porteqbot as an Electric Lawn Mower?

Our smart coil starter contains a magnetic motor, motherboard and battery capable of powering and controlling lawn mowers and snow blowers for 2-4hours in full charge. We also provide an extra battery slot to have up to 4 – 8 hours of operation.

How to use Porteqbot as an Electric Lawn Mower?

  • Mount our “smart coil starter” on the Porteqbot Lawn Mower Body
  • Connect the smart coil starter to the phone APP/use remote control and start powering on/ off your lawn mower.
  • For autonomous operations, mount the Mower inside our carrier/robot and activate autonomous tasks through our phone app

How to use Porteqbot as an Electric Snow Blower?

  • Mount the Porteqbot smart coil starter on the Porteqbot Snow Blower Body.
  • Connect the smart coil starter to the phone APP/use remote control and start powering on/ off your lawn mower.
  • For autonomous operations, mount the Mower onto our carrier/robot and activate autonomous tasks through our phone app

What’s in Porteqbot’s retrofits kit?

There are total of six(6) components in Porteqbot to have full capabilities. Only one(smart coil starter) is required to start using Porteqbot.

  • Automation
    • Smart Coil Starter
  • Autonomous
    • Robot (Carrier)
  • Electric Equipment Components
    • Lawn Mower
    • Snow Blower
  • Power Management Components
    • Smart Automatic Transfer Switch
    • Smart Phase Transfer Switch
  • Anywhere Control:
    • Smart Wi-Fi Adapter (for remote access to all components)

Suggestions

Please feel free to submit your comments and or suggestions for our Porteqbot system. Thank you in advance.

Add comment

This conversation is missing your voice

Smart Watch

Smart Edition

Smart Edition

$349$299 early bird offer

8mm Silver Aluminum Case with Blue Sport Band. Its perfect fit for tracking fitness. 100% waterproof. Buy this limted edition sports edition.

Choose a color

Qty

Size